91.2 Plain Ti SAK Scales

Titanium scales for medium Swiss pocket knives with a total length of 91 mm. Comes with a set of three stainless steel screws for the pocket clip. Pocket clip not included, compatible with e.g. three-hole Benchmade clips.

Installing:

1. Remove all possible scale tools (toothpick, tweezers etc) from the original scales
2. Remove the original scales by prying them off. They should pop off pretty easily.
3. Clean the bare metal area if necessary and make sure your new DC scales fit perfectly
4. Apply two-component epoxy adhesive inside of the DC scales. Be aware of the possible recesses for scale tools.
5. Press the DC scales onto the Swiss pocket knife
6. Ideally use a pair of clamps or similar to ensure slight but constant pressure
7. Wait until the adhesive is completely dry, then you’re done!